Description
The Handler IV is the king of batch induction systems with its larger liquid volume and incredible agitation capability. The Handler comes complete with a total drainage tank, a dual port venturi for bulk chemical induction, twin agitation lines, two 16” hinged lids (one with the Handler knife and one without), container and tank rinsing nozzles, a 4-way forkliftable steel frame, and a pump containment tray. Using closed loop recirculation through the exclusive dual port venturi, this model is able to induct bulk chemical into the Handler tank without your sprayer needing to be there! Whether it is high volumes of liquid pesticides or large amounts of dry flowables needing to be agitated, a Handler IV can do it all before your sprayer is back to be filled.
Features include:
- Twin agitation lines.
- Comes with The Handler knife.
- Closed loop recirculation and agitation.
- Full 10L/20L container emptying and rinsing capabilities.
- Dual port venturi for driving bulk chemical into the Handler or direct to sprayer fill line.
QUICK SPECIFICATIONS
- 230 US GAL/870L
- 3” CAMLOCK CONNECTIONS
- TWO X 16” HINGED AND LOCKABLE LID
- 2” DUAL PORT VENTURI
- ROTACRAFT TANK RINSING NOZZLE
- Up to 390 GPM, using 29944 cast iron pump
- 5-vane, 316 stainless impeller in 29944 cast iron pump
- 230 gallon tank with two 16” lids enables two people to mix chemical at once
- Manifold fittings enable easy part swapping
- Venturi to pull product from totes or drums
- Double agitation
- Jug knife and rinse
- Tank rinse head to clean inside of tank
- 1” camlock to add a wash-down hose
- Ability to recirculate product to prevent separation
- Ability to use tank mix or clean water to induct chemicals via venturi*
*Venturi will pull at approximately a 1:1 ratio of chemical to water when using a Banjo poly pump. However, the volume of a 3” Flomax pump often results in a 1:3 ratio of chemical to water. In other words, when using the high flow Flomax, you may experience pulling 25 gallons of chemical with 75 gallons of water.
