Handler III, 2”

After 20 years, the Handler III remains one of the best selling models in the entire Handler lineup. A larger 70 US gallon tank allows for handling higher volumes of dry flowables and powders which can be easily mixed into solution with the integrated pump and closed loop recirculation. Full functionality includes: Handler tank filling and agitation, closed loop recirculation, dual inlet venturi draw from your choice of Handler tank or bulk containers, 10L & 20L container emptying and rinsing, tank rinsing, a wash line, and of course water transfer to the sprayer tank.

All the functionality with a larger tank, combined with cost effective 2” plumbing and pump, make the H32P55 a steady favourite on the farm.  Features include:

• Full 10L/20L container emptying and rinsing capabilities.
• Dual port venturi with Handler and bulk draw capabilities.
• Integrated transfer pump.
• Comes with the original Handler knife.
• Closed loop recirculation and agitation.
• Tank emptying by venturi or direct pump draw.

QUICK SPECIFICATIONS

• 70 US GAL/275L
• 2” CAMLOCK CONNECTIONS
• 16” HINGED AND LOCKABLE LID
• 2” DUAL PORT VENTURI
• 2” BANJO PUMP/GX200 HONDA ENGINE (exculded on H32 model)
• ROTACRAFT TANK RINSING NOZZLE
• Up to 190 GPM, using cast iron pumps with high-flow impellers
• Manifold fittings enable easy part swapping
• Venturi to pull product from totes or drums
• Tank agitation
• Jug knife and rinse
• Tank rinse head to clean inside of tank
• Ability to recirculate product to prevent separation
• Ability to use clean water to induct chemicals via venturi*