Description
The Handler II is the most compact model that still offers all the flow and functionality of the larger models. Suitable for everything from dry flowables, to 10L and 20L containers, to bulk containers, this is the most compact 3” inductor system on the market. Water is simply pumped to the inlet of the Handler II which provides the flow to; agitate and fill the tank, empty and rinse containers, power the dual inlet venturi, rinse the tank, and of course transfer water to your sprayer tank.
The Polywest exclusive dual inlet venturi comes plumbed to draw from your choice of the Handler tank or your bulk containers, directly into your sprayer fill line. The full 3” bypass line on the Handler II is designed to handle the rigors of any pump with capacities of up to 280 GPM (1060 LPM) without any concern for pressure. Banjo’s exclusive sweep elbows are used to eliminate as much line turbulence as possible. Features include:
- Full 10L/20L container emptying and rinsing capabilities.
- Comes with the original Handler knife.
- Dual port venturi with Handler and bulk draw capabilities.
- Durable 3” bypass for flows up to 280 GPM.
QUICK SPECIFICATIONS
- 42 US GAL/160L
- 3” CAMLOCK CONNECTIONS
- 16” HINGED AND LOCKABLE LID
- 2” DUAL PORT VENTURI*
- Up to 390 GPM, using cast iron pumps with high-flow impellers.
- 5-vane, 316 stainless impeller in 3” cast iron pump.
- Manifold fittings enable easy part swapping.
- Tank agitation.
- Jug knife and rinse.
- Ability to recirculate product to prevent separation.
- Ability to use clean water to induct chemicals via venturi.*
*Venturi will pull at approximately a 1:1 ratio of chemical to water when using a Banjo poly pump. However, the volume of a 3” Flomax pump often results in a 1:3 ratio of chemical to water. In other words, when using the high flow Flomax, you may experience pulling 25 gallons of chemical with 75 gallons of water.
