2" UL-Approved Self Priming Centrifugal Fuel Pump, Gas Engine

Price: $3,669.95
SKU:
82D1‐XR550‐X
Weight:
80.00 LBS

Description

Complete unit is UL Approved for pumping gasoline and Jet-A. Comes equipped with grounding clip and carry frame. 

PUMP SPECIFICATIONS

Size: 2” x 2” NPT ‐ Female.

Casing: Aluminum Alloy 356‐T6 w/Gray Iron 30 Cutwater Insert. Maximum Operating Pressure 50 psi (345 kPa)

Semi‐Open Type, Three Vane Impeller: Aluminum Alloy 356‐T6. Handles 5/8” (15,8 mm) Diameter Spherical Solids.

Replaceable Wear Plate: Carbon Steel ASTM A36. Intermediate Bracket: Gray Iron 30.
Seal: Type 9, Mechanical, Self‐Lubricated. PTFE Wedge.

Silicon Carbon Stationary Face. Fluorocarbon Elastomers (DuPont VitonR or Equivalent). Maximum Temperature of Liquid Pumped, 160_F (71_C).*

Shaft Sleeve: Stainless Steel 304.
Flap Valve: Nitrile Nylon Coated Fabric; Gray Iron 30. Flange: Gray Iron 30.
Gaskets: Cork w/Nitrile Binder NC710.
Hardware: Standard Plated Steel.

Standard Equipment: Roll Cage w/Rubber Feet. 90_ Discharge Elbow.

Optional Equipment: Wheel Kit w/Semi‐Pneumatic Tires. Strainer.

ENGINE SPECIFICATIONS

Model: Briggs & Stratton XR550.
Type: Single Cylinder, Four Cycle, Air Cooled,

Gasoline Engine.
Displacement: 7.75 Cu. In. (127 cc). Lubrication: Splash System.
Air Cleaner: Dual Element, Semi Dry. Fuel Tank: 2 U.S. Qts. (1,9 Liters).

Full Load Operating Time: 1.9 Hrs. Starter: Rope Rewind.

Standard Equipment: Manual Start‐Run Choke Control, Manual Throttle Control with Top Speed Limit. Spark Arresting Muffler and Heat Shield. Shielded Ignition. Grounding Wire.